logo3.GIF (4256 bytes)              Products

blank.gif (60 bytes)

Blower Filter Overhead Module
BFM Series

blank.gif (60 bytes)

prod4.1.gif (2390 bytes)
blank.gif (60 bytes)

AIR CRAFTERS, INC BFM Series (Blower Filter Overhead Module) has been designed and engineered with careful attention to user needs, based upon our extensive market research and industry expertise. Our BFM Series performs at peak efficiency throughout the recommended life of its filter. With an overall weight of 65 lbs. it is one of the lightest units manufactured. Our exclusive ARRAYED AIR-DELIVERY SYSTEM ensures an even air flow across the entire filter face.

This innovation has also enabled us to reduce generated sound levels, making our unit the quietest in the industry with measured levels not exceeding 58 dba.

Our BFM Series is offered in four sizes, increasing its adaptability to specific process applications and customer needs. This product has been manufactured to the highest quality standards, and we assure your satisfaction with its performance.

Thank you for considering AIR CRAFTERS for your airborne contamination control needs.

blank.gif (60 bytes)

shade.gif (2120 bytes)
blank.gif (60 bytes)


  • Unit construction: anodized aluminum filter frame with a galvanized 20 ga. steel blower motor housing.
  • HEPA filtration rated 99.99% efficient @0.3 microns.
  • Protective powder-coated screen for HEPA filter face.
  • ARRAYED AIR-DELIVERY SYSTEM for quiet, efficient operation.
  • Knife-edge to closed-cell foam gasket to prevent air bypass between motor housing and filter frame.
  • Integral suspension points for overhead attachment.
  • Pre-filtration through 30% efficient disposable fiberglass filters.
  • Easy access for electrical hookup.
  • Blower motor speed control for air velocity adjustment.


  • 100% 304 stainless steel construction with a #4 finish for the blower motor housing.
  • ULPA filtration 99.9995% efficient @0.12 microns.
  • Aerosol challenge introduction port.
  • Magnehelic gauge connection port.
  • Optional voltages in 230v 60 hz 1 ph (50 hz also available).
  • AC ionization grid with power pack.
  • DC ionization pulse bar type with power pack.
  • Factory installed power cord and grounded plug.
shade.gif (2120 bytes)
blank.gif (60 bytes)


  • All filters are PSL challenged at factory to insure media integrity. Certificates of conformance are available upon request.
  • Unit performance meets or exceeds standards as specified in Fed. Std. 209E and IES-RP-CC-002.
  • All electrical components are UL listed.
  • All electrical wiring is in conformance with NEMA standards.
  • AIR CRAFTERS inspection reports available upon request.
  • Approval drawings available upon request.

blank.gif (60 bytes)
BFM-22-GH 23.625" x 23.625" x 12" 115v - 60hz - 1ph F.L.A. = 0.8 90 FPM +/- 20% @0.5 w.g.
BFM-24-GH 23.625" x 47.625" x 12" 115v - 60hz - 1ph F.L.A. = 1.6 90 FPM +/- 20% @0.5 w.g.
BFM-26-GH 23.625" x 71.625" x 12" 115v - 60hz - 1ph F.L.A. = 2.4 90 FPM +/- 20% @0.5 w.g.

All catalog dimensions are nominal. All shipping weights estimated.

buttonconcepts.gif (3184 bytes)buttonproducts.gif (2668 bytes)buttonbio.gif (2719 bytes)buttonsite.gif (2753 bytes)buttoncontact.gif (2651 bytes)

buttonhome.gif (1894 bytes)


Air Crafters, Inc.
2085 Fifth Avenue
Ronkonkoma, NY 11779
(631) 471-7788 Voice
(631) 471-9161 FAX


1998 Air Crafters, Inc., All Rights Reserved.
We welcome your feedback.