logo3.GIF (4256 bytes)              Products


blank.gif (60 bytes)

Clean Room Luminaires
Class 10 CR Series
blank.gif (60 bytes)


blank.gif (60 bytes)prod4.11.gif (2122 bytes)

The AIR CRAFTERS, INC. line of clean room luminaires have been designed to totally eliminate particulate and vapor migration into class 10 clean areas. Designed specifically for installation into ceiling grid systems, this fixture incorporates our unique grid seal system. This feature ensures total seal by way of a fully gasketed and hermetically sealed light box. The lower lens frame door then mounts from below. The door frame is fully welded and gasketed.


When installed onto the upper light box, it creates a clamping surface completely around the peripheral edge of your grid system. This establishes a sandwiching effect between the grid, upper light box and door frame. This condition provides a double-gasket seal of the fixture into your ceiling system, creating an impenetrable barrier against microscopic particulate infiltration. The aerodynamically designed door frames of these luminaires reduce air flow disruption to the barest minimum. Constructed of 20 gauge CRS and coated with white polyurethane over a bonderized surface, our lighting installations will provide durability and long lasting aesthetic appeal. The extensive options offered will custom suit any requirements. This product has been manufactured to the highest quality standards, and we assure your satisfaction.

Thank you for considering AIR CRAFTERS for your airborne contamination control needs.

blank.gif (60 bytes)

shade.gif (2120 bytes)
blank.gif (60 bytes)

STANDARD FEATURES

  • Formed 20 ga. CRS with a white polyurethane finish
  • Door frame 16 ga. CRS with a white polyurethane finish
  • Shielding .125-K-12 prismatic pattern smooth side to room
  • Ballast-rapid start-HPF, CBM/ETL-Class P energy saving
  • Silicone closed-cell gasketing for all contact surfaces

OPTIONAL FEATURES

  • 100% 304 or 316 stainless steel construction with a #4 finish
  • Emergency battery pack
  • G.E. Maximizer II ballast
  • GLR fuse and HLR holder
  • 0 degree ballast
  • Tamper-proof
shade.gif (2120 bytes)
blank.gif (60 bytes)
blank.gif (60 bytes)NOTES:
  • This system meets or exceeds standards as speciified in Fed. Std. 209 E.
  • AIR CRAFTERS inspection reports available upon request
  • Approval drawings available upon request
  • USDA approved
  • UL listed

blank.gif (60 bytes)
MODEL LAMPS VOLTAGE DIMENSIONS
CRB-14-GX (2) 40 Watt Tubes 115/277

12" x 48" x 4 15/16"

CRB-22-GX 40 Watt Biax 115/277 24" x 24" x 4 15/16"
CRB-24-GX (4) 40 Watt Tubes 115/277 24" x 48" x 4 15/16"

All catalog dimensions are nominal
blank.gif (60 bytes)


buttonconcepts.gif (3184 bytes)buttonproducts.gif (2668 bytes)buttonbio.gif (2719 bytes)buttonsite.gif (2753 bytes)buttoncontact.gif (2651 bytes)
 

buttonhome.gif (1894 bytes)

 

Air Crafters, Inc.
2085 Fifth Avenue
Ronkonkoma, NY 11779
(631) 471-7788 Voice
(631) 471-9161 FAX

info@air-crafters.com
http://www.air-crafters.com


1998 Air Crafters, Inc., All Rights Reserved.
We welcome your feedback.